performance
Pagani Huayra uses a twin-turbo engine Mercedes-AMG 60 ° V-12 engine. 6.0-liter engineHuayra, M158, generates 720 horsepower (537 kW) and 1,000 N · m (£ 740 · ft) of torque. Its top speed is over 230 mph (370 km / h) and shot 0-60 miles per hour (0-97 km / h) time of 3.3 seconds. Using Pirelli tires, and the Pagani Huayra is able to withstand 1.66 g of lateral acceleration at speeds up to 230 mph (370 km / h).
The option to not use a double clutch in bath oil is because it would lead to an increase in body weight over 70 kg (154 lb), negating the advantage of the ability of the transmission to change gears more quickly As a result, the transmission of the entire Huayra Pagani weight of 96 kg (210 lb).
This car is equipped with brakes bespoke Brembo calipers, rotors and pads. 6-piston calipers up front and 4-piston at the rear. Drilled carbon ceramic rotors, 380 mm (15.0 in) in diameter and 34 mm (1.3 in) thick. There are also four independent flaps that can act as an air brake or generate downforce.
Machine
Mercedes-Benz AMG division provides the Huayra engine. 5980 cc, twin-turbo, 60 ° AMG M158 V12, have been modified at the request of the Pagani to reduce turbo lag and improving response, manifested by smaller turbos, intercooler different configuration, and re-programmed ECU settings.It has several key benefits including ensuring the flow of oil even when the car is accelerating extreme lateral, preventing the "surge of oil" which allows the engine to operate more efficiently, while the lack of oil allowing the engine mounted lower, lowering the car center of gravity and improve handling.
A heat exchanger water/oil reduces engine warm-up time on cold days and help maintain a stable temperature for cooling and lubrication.
To minimize the use of pipes and fittings (and the overall weight of the vehicle), the expansion tank is mounted directly on the engine. Fin intercooler acts as an expansion tank circuit at low temperatures.
Titanium exhaust system was designed and created by MHG-Fahrzeugtechnik. hydroformed joints developed to reduce back pressure and ensure the free flow exhaust. Titanium exhaust system reduces weight while increasing reliability Inconel silencers in the most open part of the exhaust at high temperatures. The entire system weighs less than 10 kg.
No comments